date filerev by edv no date checked drawn name scale description position general tolerance basic material projection drawing.- no. c bounce 10ms max. 14-04-11 daf d revised matchcode 14-10-30 e remove contact cladding al ws-tasu 4,7x3,5 mm side push tact switch, j-bend smd version 4343x30458xx 4343x30458xx.dft 10-07-14 jelisarow 5:1 system :solid edge v20 we eican cad wrth elektronik eican .x = +/- 0,2 .xx = +/- 0,15 a4 size 11-10-28 warning texta wj this electronic component is designed and developed with the intention for use in general electronics equipments. before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body, wurth elektronik must be asked for a written approval. in addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before by the user before usage. 12-06-06description b wj 10-07-14 hsu 14-07-24 daf 1 2 3 4 scale - 5:1 p.c.b. mounting plan schematic 4 3 2 1 4,0 6,0 0 , 7 2 , 7 technical characteristics spec i f i c a t i on >rating: 50ma, 12vdc >contact resistance: initial: 100mohm max. after life test: 1ohm max. >insulation resistance: min. 100mohm at 500vdc >dielectric strength: 250vac for 1 minute >bounce: 10ms max. ma t er i a l >cover: stainless steel >stem: pa46, ul hb >frame : pa46, ul hb, color white >contact: stainless steel with silver >terminal: copper alloy with silver plating >tape: polyimide tape so l der i ng i n f orma t i on >terminal in smd version >reflow soldering according to jedec j-std 020 hot air >hand soldering under 350c for 3 sec. max env i ro nmen t a l >storage condition: -40c ~ +85c >operation condition: -40c ~ +85c >compliance: lead free, rohs, reach pac k ag i ng i n f orma t i on >tape & reel 2 1 4 3 3 , 5 4 , 5 0 , 2 2,6 1 , 4 1 , 6 5 4,7 5,5 0,2 3,7 1 , 7 0 , 6 1 , 0 pn force color of stem life cycle 434 353 045 816 160g 50gf white 200.000 434 333 045 822 220g 50gf black 100.000 0,25 mm 0,1 0,30 mm +0,1 / -0,2 stroke
|